KOBOLD VR300 VACUUM ROBOT SOFTWARE UPDATE 

The software on the Kobold VR300 is constantly evolving and being optimized by the Vorwerk engineers. Download the latest version and install it on the robot as explained below.

The easiest way to update your software is to do it through the Kobold Robot App.

iTunes Store Google Play Store

Once your Robot is connected to the app, you will be prompted to update the software directly in app through a notification.

If you do not use the app, you can alternatively download the Software here. 

Download 

Follow the steps below to update the robot: 

WHAT YOU WILL NEED 

  • A USB stick
  • A Kobold USB adaptor (not provided with the robot, you can purchase it here)

HOW TO INSTALL THE UPDATE 

  • Extract the software to a USB stick. Make sure there is only one folder on the USB stick and the folder name is “RobotData”
  • Open the dust-bin lid of the VR300 and connect the USB stick to the robot using the connection cable
  • See that the red flashing LEDs turn to green blinking
  • Wait until the audio signal and see that LEDs turned back to red blinking (this can take many minutes)
  • Unplug the USB stick and close the dust-bin lid