“FINALLY, SOMEONE WHO KNOWS HOW TO TREAT ME.“

The new Kobold EB400 Automatic Vacuum Cleaner with fully automatic floor detection for uncomprimising cleanliness.

We understand surfaces.

BOOK A DEMONSTRATION

The Kobold EB400 Automatic Electric Brush is the most intelligent way to clean, and ensures that vacuuming hard floors and carpets is both gentle and thorough.

Using fully automatic floor type detection, the EB400 Automatic Electric Brush is an expert in delivering uncompromising cleanliness on all floor types.

Fully automatic floor type detection

Agile and extremely precise

Class A energy efficiency

LED OPERATING DISPLAY

Auto start-stop

Safe-park position
with auto switch-off

Automatic floor type detection

Simply revolutionary: the ultrasonic sensors on the EB400 Automatic Electric Brush automatically detect floor type and activate the appropriate performance power and floor setting fully instantly!

SPECIAL ROTATING BRUSHES

The EB400 Automatic Electric Brush is driven by its own motor, and a unique rotating brush ensures that cleaning is always thorough, gentle and hygienic. Even the finest dirt particles don’t stand a chance; the EB400 Automatic Electric Brush removes dirt and dust completely.

AWAY WITH DUST AND DIRT

During the brush-vacuuming process, the rotating brush “combs” the carpet to gently loosen stubborn dirt and give deeper layers a thorough clean. A continuous sealing lip prevents dirt and dust from being thrown back out.

SWIVEL/PIVOT JOINT
Easy to manoeuvre for no fuss cleaning

Close to the floor
Slim, sleek design makes for easy vacuuming under low objects

Close up vacuuming
Suction across the entire width of the attachment lets you get right up to the wall

HOUSING
HOUSING	High-grade recyclable thermoformed plastic
MOTOR
MOTOR	Maintenance-free DC motor and maintenance-free toothed belt drive
VOLTAGE
VOLTAGE	220–240 volts alternating current 50/60 Hertz
NOMINAL OUTPUT
NOMINAL OUTPUT	50 watts (only for use in combination with Kobold vacuum cleaners)
BRUSH
BRUSH	WORKING WIDTH
WORKING WIDTH
WORKING WIDTH	300 mm
CARPET MODE
CARPET MODE	1860-2500 RPM
HARD FLOOR MODE
HARD FLOOR MODE	800 RPM
WEIGHT
WEIGHT	1.8 kg
DIMENSIONS
DIMENSIONS	Height: approx. 7 cm (with horizontal joint) Width: approx. 30 cm Length: approx. 35 cm (with horizontal joint)

All technical data

Frequently Asked Questions

How do I look after the EB400 brushes properly?

The Automatic Electric Brush is too loud.

The roller brush is not mounted on the TORX® cam of the gear mechanism.

Check if the roller brush is correctly inserted and mount it on the TORX® cam of the gear mechanism if necessary.

The small bearing ball of the cup and ball bearing is missing.

Make sure that the bearing ball is properly inserted.

The green cap of the cup and ball bearing is not properly installed.

Check if the green cap is properly installed. If not then position the green cap correctly.

The floor plate is not properly engaged.

Make sure that both locks (left and right) engage audibly with a click during installation.

Original Kobold accessories have not been used, which can lead to bearing or motor damage.

Use an original Kobold roller brush only.

An object might have got stuck in the area around the roller brush.

Remove the object.

The slider for switching between coarse materials and fine dust on the underside of the Automatic Electric Brush cannot be moved.

The Automatic Electric Brush is in hard floor mode.

Make sure that the Automatic Electric Brush was properly switched off. Connect the Automatic Electric Brush with the Upright Vacuum Cleaner and in the standby position (joint locked) switch them off and back on again.

The Automatic Electric Brush is now in carpet mode.

The Automatic Electric Brush switches itself off, the operating display flashes red

A vacuumed object is blocking the brush of the Automatic Electric Brush.

Switch the device off and unplug the mains plug from the socket.
Remove the object.

Threads block the brush of the Automatic Electric Brush.

Cut the threads as described in chapter “4.3.1 Checking and Cleaning” on page 75 in the VK200 Instruction Manual.

The suction channel of the Automatic Electric Brush is blocked.

Switch the device off and unplug the mains plug from the socket.

Open the inspection flap on the underside of the Automatic Electric Brush.
Remove the blockage
To do this, use an appropriate object (e.g. screwdriver, crochet needle).

The Automatic Electric Brush is hard to push.

You might have set the power performance level too high.

Use the main switch on the handle of the Upright Vacuum Cleaner to set the device to a lower power performance level or use power performance level auto in general.

The Automatic Electric Brush may be in manual operating mode.